需要 TCP 封包,主要埠口為 port 139, 445 nmb,學校為了安全,把校園局域網的 445 端口都給關了,管理分享的目錄,造成平時正常的 samba 文件… 首頁 會員 發現 等你來答 登錄 加入知乎 計算機網絡 Samba Windows 10 Windows 10 下如何修改 smb 連接的默認端口(445)?最近比特幣勒索病毒很

[closed] SMB over TCP 445 only for Windows clients

Hi all, Sorry if the topic was already discussed, I could not find it by searching. I read that it is possible to avoid port 137:138 (UDP) and TCP port 139 for flexshare and I could use port 445 instead. I switched off Netbios in Windows (TCP4 adapter settings) and lost
TCP/IP ports necessary for CIFS/SMB operation
Ports 137-139 are for NetBios/Name resolution. Without it you will have to access machines by IP address opposed to NetBIOS name. Example \\192.168.1.100\share_name opposed to \\my_file_server\share_name So port 445 is sufficient if you can work with
command line
I ran on ports 139 and 445. I’ll fix that now. – ppco22x Sep 25 ’20 at 19:07 If you have SMB running on your ubuntu you can stop the service “sudo service smbd stop” then check again for open ports, if that worked then fully disable the service if you do not need it as the FW just blocks the ports, but disabling the service will make sure they are not running at all – SimpliFixed Sep 25
[Samba] smbpasswd port 139
Posted in group: linux.samba I have a network where the domain controllers do not connect on port 139 Is there a way to have smbpasswd change the password without this? I am able to change the password using an ldap method in php ldap_connect ldap_bind
Oracle® Linux 8 Managing Shared File Systems
The default ports are 139 (used for SMB over NetBIOS over TCP) and port 445 (used for plain SMB over TCP). (Optional) Add similar rules for other networks from which Samba clients can connect, as required.
第 8 堂課
就是 Samba 的主要服務,但要令 Samba 與伺服器的外界溝通, 相容於 NetBIOS,傳輸檔案與身份驗證等等重要功能 (只要這個即可) 因為涉及檔案傳輸,因為安全性是非常重要,我們需要花點功夫及對它有所認識。 SAMBA 採用連接埠 137 — 139 及 445。為甚麼會是這些連接埠?讓我們看得再詳細一點。微軟的舊款主從通訊協議是 netbios。它的連接埠是
Unable to connect to SAMBA. Port 139 is closed.
 · 1 ) Port 139 and 445 are not open. 2 ) smbd daemon is very often dead. Any help ? But I used to install samba on suse linux 10.0 and x86 processor with no problem ( and no firewall ). This time my new pc is an X64 processor with suse 10.3. jcdole, Jul 18 #7

UFW blocks Samba(port 445) although port 445 is …

137, 138, 139 & 445. those ports are open, all ports from 1 – 10000 are opened. ufw allow Samba this is maybe somewhat relevant but still does not help, let me explain a bit better. If i kill my service that listens on 445, and do, lets say: nc -l 445 (i listen on port 445

Penetration Testing in SMB Protocol using Metasploit …

And in the result, as above, you can see that Ports 445, 139 were infecting open. Conclusion : Understanding a port and finding such things through a given port helps us to exploit our victim much more accurately as gather the most minute piece of information.
How can I tell if Samba is running?
 · Samba is included in most Linux distributions. To install Samba on Ubuntu, simply run the following command in terminal. To check if Samba service is running, issue the following commands. Once started, smbd will be listening on TCP port 139 and 445.

Samba Networking and Linux firewall questions …

 · THere are no ports 137-139 involved here. It is using the modern samba port of 445 and the mDNS port of 5353. The trick here is do not go through Network > Shared Folders ( SMB ). Go through Network > Network In fact if you have the samba package installed

Eksploit Port 139 445 SMB Menggunakan Nmap & …

Eksploit Port 139 445 SMB Menggunakan Nmap & Msfconsole Kali Linux Subscribe : http://bit.ly/36iJlijThx
Windows 10 下如何修改 smb 連接的默認端口(445)?
最近比特幣勒索病毒很猖狂,會去搜尋區網內的各個 NetBIOS name 來進行網路主機名稱的列表等。
Samba AD DC Port Usage
On both interfaces, the ports 139/tcp, 88/tcp, and 445/tcp are opened. For further information on the output, see the netstat (8) manual page. To bind Samba to specific interfaces, see Configure Samba to Bind to Specific Interfaces. Samba AD DC Port Usage

Sharing TO W10 from W7 and most Linux distros …

 · What apparently is happening is that Windows 10 is only listening for PORT 445. SAMBA / W7 machines check Port 139 first — wait for an acknowledgement (or other response) – and then if negative send out port 445. On W10 port 139 doesn’t return any
Samba Domain Member Port Usage
On both interfaces, the ports 139/tcp and 445/tcp are opened. For further information on the output, see the netstat (8) manual page. To bind Samba to specific interfaces, see Configure Samba to Bind to Specific Interfaces. Samba Domain Member Port Usage
在windows上連接一個非445端口的smb服務 | Hobai's Blog
networking
However, netstat -tpln | grep “smbd” returns nothing and also nmap shows “closed” on ports 139 and 445. What I tried so far is activating these options in /etc/samba/smb.conf, but it doesn’t help: interfaces = enp2s0 bind interfaces only = true I am clueless what
zh-tw/HowTos/SetUpSamba
這其實是一件好事